Latest Products https://www.ninthwave.co.in Latest Products Thu, 21 Oct 2021 17:07:44 +0530 en-us https://www.ninthwave.co.in Flow Meters https://www.ninthwave.co.in/flow-meters.htm https://www.ninthwave.co.in/flow-meters.htm Wed, 12 May 2021 00:00:00 +0530 Ultrasonic Clamp-On Flow meter https://www.ninthwave.co.in/ultrasonic-clamp-on-flow-meter.htm https://www.ninthwave.co.in/ultrasonic-clamp-on-flow-meter.htm Wed, 12 May 2021 00:00:00 +0530 Details : Non-intrusive. No risk of contamination or leakage Easy installation. No pipe cutting, no hole drilling. Save installation cost Can be easily moved from one location to another For pipe size DN25 ~ DN6,000 (1”~240”)   Ultrasonic flow measurement is among the best & most accurate technology available these days. It is widely accepted & prominently used across the industries due to its non-cohesive nature with the flow media. It is also non-effected in high magnetic field zones, where other technologies like electromagnetic & Boltzmann’s turbine technologies might have a challenge.   Our Shenitech ultrasonic flow meters work on Transit time principle which ensures high accuracy. Our ultrasonic flow meters are used not only for domestic water application but also in dirty water having high TDS, in Sewerage treatment & effluent treatment application.   Transit time principle is annotated as below.   “ It is the time difference taken by two UH frequency pulses to reach the diametrically opposite ends of the pipe, which is related to the velocity of the fluid media inside pipe in direct proportion ”   Suppose ‘T1’ is the time taken by pulse to travel downstream to the flow of media & ‘T2’ is the time take by the pulse to travel upstream of the flow media moving unidirectional with velocity ‘v’ , then time difference ‘δT’ is related to velocity as   (T2 – T1) = δT Or δT α v Or δT = k * v Or δT/k = v   Cross section area of pipe is ‘A’ Then Flow rate ‘Q’ can be calculated as  Q=v*A    We can offer inline type as well as clamp-on and insertion type sensors, depending upon the applications’ requirement. Our flow meters offer all standard signal outputs like analog outputs (4- 20 mA or 0-10 VDC), Modbus over RS-485, M-Bus etc. which is widely accepted for third party integration.   Benefits & Features : Low maintenance as no moving parts High Accuracy as high as ± 1% OIML R49 standard. CE Approval Low pressure drop Tamper Proof Design Low Cost Over long run We have all types of sensors option available as far as mounting is considered. The sensor selection is generally depend upon the application & site conditions. We recommend to take our expert advice before making selection of appropriate sensor. Insertion Flow meter https://www.ninthwave.co.in/insertion-flow-meter.htm https://www.ninthwave.co.in/insertion-flow-meter.htm Wed, 12 May 2021 00:00:00 +0530 Details : Excellent long-term stability Better accuracy than clamp-on Better signal strength, thus, better performance than clamp-on when liquid has some solids For pipe size ≥DN80 (3”)   Ultrasonic flow measurement is among the best & most accurate technology available these days. It is widely accepted & prominently used across the industries due to its non-cohesive nature with the flow media. It is also non-effected in high magnetic field zones, where other technologies like electromagnetic & Boltzmann’s turbine technologies might have a challenge.   Our Shenitech ultrasonic flow meters work on Transit time principle which ensures high accuracy. Our ultrasonic flow meters are used not only for domestic water application but also in dirty water having high TDS, in Sewerage treatment & effluent treatment application.   Transit time principle is annotated as below.   “ It is the time difference taken by two UH frequency pulses to reach the diametrically opposite ends of the pipe, which is related to the velocity of the fluid media inside pipe in direct proportion ”   Suppose ‘T1’ is the time taken by pulse to travel downstream to the flow of media & ‘T2’ is the time take by the pulse to travel upstream of the flow media moving unidirectional with velocity ‘v’ , then time difference ‘δT’ is related to velocity as   (T2 – T1) = δT Or δT α v Or δT = k * v Or δT/k = v   Cross section area of pipe is ‘A’ Then Flow rate ‘Q’ can be calculated as  Q=v*A    We can offer inline type as well as clamp-on and insertion type sensors, depending upon the applications’ requirement. Our flow meters offer all standard signal outputs like analog outputs (4- 20 mA or 0-10 VDC), Modbus over RS-485, M-Bus etc. which is widely accepted for third party integration.   Benefits & Features : Low maintenance as no moving parts High Accuracy as high as ± 1% OIML R49 standard. CE Approval Low pressure drop Tamper Proof Design Low Cost Over long run We have all types of sensors option available as far as mounting is considered. The sensor selection is generally depend upon the application & site conditions. We recommend to take our expert advice before making selection of appropriate sensor. Inline Flow meter https://www.ninthwave.co.in/inline-flow-meter.htm https://www.ninthwave.co.in/inline-flow-meter.htm Wed, 12 May 2021 00:00:00 +0530 Details : Excellent long-term stability Best accuracy among the three transducer types Flowmeter is pre-programmed in factory, thus, it is a simple plug and play device For pipe size DN10~DN500 (3/8”~20”)   Ultrasonic flow measurement is among the best & most accurate technology available these days. It is widely accepted & prominently used across the industries due to its non-cohesive nature with the flow media. It is also non-effected in high magnetic field zones, where other technologies like electromagnetic & Boltzmann’s turbine technologies might have a challenge.   Our Shenitech ultrasonic flow meters work on Transit time principle which ensures high accuracy. Our ultrasonic flow meters are used not only for domestic water application but also in dirty water having high TDS, in Sewerage treatment & effluent treatment application.   Transit time principle is annotated as below.   “ It is the time difference taken by two UH frequency pulses to reach the diametrically opposite ends of the pipe, which is related to the velocity of the fluid media inside pipe in direct proportion ”   Suppose ‘T1’ is the time taken by pulse to travel downstream to the flow of media & ‘T2’ is the time take by the pulse to travel upstream of the flow media moving unidirectional with velocity ‘v’ , then time difference ‘δT’ is related to velocity as   (T2 – T1) = δT Or δT α v Or δT = k * v Or δT/k = v   Cross section area of pipe is ‘A’ Then Flow rate ‘Q’ can be calculated as  Q=v*A    We can offer inline type as well as clamp-on and insertion type sensors, depending upon the applications’ requirement. Our flow meters offer all standard signal outputs like analog outputs (4- 20 mA or 0-10 VDC), Modbus over RS-485, M-Bus etc. which is widely accepted for third party integration.   Benefits & Features : Low maintenance as no moving parts High Accuracy as high as ± 1% OIML R49 standard. CE Approval Low pressure drop Tamper Proof Design Low Cost Over long run We have all types of sensors option available as far as mounting is considered. The sensor selection is generally depend upon the application & site conditions. We recommend to take our expert advice before making selection of appropriate sensor. BTU Meters https://www.ninthwave.co.in/btu-meters.htm https://www.ninthwave.co.in/btu-meters.htm Wed, 05 May 2021 00:00:00 +0530 Variable Air Volume Box https://www.ninthwave.co.in/variable-air-volume-box.htm https://www.ninthwave.co.in/variable-air-volume-box.htm Wed, 12 May 2021 00:00:00 +0530 Variable Air Volume (VAV) Boxes are required to control air supply as per the requirement in an air distribution network of air flow in a particular zone. VAV Boxes are used very frequently in office space, commercial towers, conference rooms & control area to control temperature & try to achieve a particular set point given to its thermostat.   VAV Boxes by varying airflow can control various parameters like temperature, CO2 level, positive differential pressure, depending upon its application. It also attains substantial energy saving by blocking access air into the duct & hence in-turn low rpms of AHU fans, unlike constant air volume system which is not capable of achieving high energy efficiency.   NinthWave   is associated with Honeywell Automation to bring out the best quality Variable Air Volume system to its customers. WE became proud ‘exclusive channel partners for VAV system’ of Honeywell Automation for complete country in year 2014.   We provide Pressure Independent type Variable air volume boxes, factory fitted with a microprocessor DDC controller, damper, damper actuator, cross flow velocity sensor with differential pressure transmitter, thermostat and in-built step down transformer. VAV boxes are calibrated in factory & undergo Honeywell’s stringent quality check tests before being shipped out of factory. We can also customize VAV boxes as per the requirement of customer like, single skinned, double skinned, by-pass, multi leaf, with heating element etc.   VAV controller comes with BACNet® MS/TP communication standard, which is widely accepted for third party integration across the country. We also provide tested integrators for VAV integration.   In past years we have successfully commissioned VAV system at so many prestigious multi-national client offices across the country, catering to their customized requirements.   Applications successfully commissioned are briefed below. Zone Temperature Application This is the most common type of application, required to control temperature by varying air flow. The most critical of them were heating & cooling application, where air temperature changes as per the weather condition, & hence VAV operation also reversed to achieve a set point. Our technical team has mastered these applications to ensure proper operation of the system.   Fresh Air/ Ventilation (Demand Control Ventilation) Application In Demand Control Ventilation, a VAV operates to limit & measure the air flow required to maintain a CO2 differential level in a particular zone. A high CO2 level can cause lower work efficiency of the work force. Also access fresh air intake in an AHU can decrease its energy efficiency. In order to control an optimum level of CO2 differential level, a Variable Air Volume Box finds its application, it measures CO2 level & modulate accordingly to maintain a CO2 level inside a work space. We have commissioned systems having such requirement across the country successfully. Our controllers are fully compatible to maintain VOC level, rH level etc. to provide a controlled environment.   Differential Pressure Application We have also come across differential pressure application, where a VAV is placed in return duct, & it allows maintaining a higher pressure in the controlled area. This application is generally used in controlled environment like clean room, drug formulation chambers, storage cabins, Server rooms etc. Applying VAV system, an efficient dust free system can be provided by maintaining a positive pressure inside the zone. We have undertaken these critical application & successfully commissioned them. VAV Box CFM Range: We offer an extensive range of CFMs from 62 cfm to 8000 cfm Control Valves https://www.ninthwave.co.in/control-valves.htm https://www.ninthwave.co.in/control-valves.htm Wed, 05 May 2021 00:00:00 +0530 Manual Valves https://www.ninthwave.co.in/manual-valves.htm https://www.ninthwave.co.in/manual-valves.htm Wed, 05 May 2021 00:00:00 +0530 Clamp-on Ultrasonic BTU Meter https://www.ninthwave.co.in/clamp-on-ultrasonic-btu-meter.htm https://www.ninthwave.co.in/clamp-on-ultrasonic-btu-meter.htm Wed, 12 May 2021 00:00:00 +0530 The STUF 300R ultrasonic thermal energy meter provides abundant capabilities for accurate thermal energy measurement of a liquid-based thermal energy production / transferring system. It is the 3rd generation energy meter from Shenitech. Compared to its predecessors, the 3rd generation offers better performance and a richer feature set, all at a lower price.   The STUF 300R system is consisted of a high performance ultrasonic flowmeter EF10 and a pair of standard PT100 temperature sensors. The ultrasonic flowmeter is based on our cutting-edge clamp-on flow measurement technology, which is capable of measuring the flow from outside of a pipe accurately and reliably. Due to the non-intrusive nature of this technology, there is no pipe cutting, no moving parts, no pressure drop, no leaks and no risk of contamination. Besides, the installation is simple and requires no special skills or tools.   The two PT100 sensors, which could be either insertion type or surface-mounting type, are used to measure the temperature of the supply flow and the return flow. The energy consumption rate is then calculated based on the temperature difference and the measured flowrate. A built-in energy totalizer is used to accumulate the amount of energy delivered.   STUF 300R provides versatile input/output interfaces, such as isolated digital outputs, relay output, batch control, alarm, 4-20mA output. In addition, the built-in isolated RS-485 port with surge protection and MODBUS support makes remote energy monitoring and energy meter networking easy and reliable. Other output modules, such as BACnet module, Ethernet module, GSM/GPRS wireless module, RF module and more, can be added to the standard package.   STUF 300R is an ideal choice for improving HVAC, energy production and building energy efficiency in terms of heating, cooling ventilation and air-conditioning.   Advantages : Non-intrusive thermal energy/BTU measurement Easy and economical installation; no pipe work required No moving parts to wear and tear; no maintenance required Industrial grade temperature sensors and ultrasonic sensors for improved robustness Paired PT100 RTD sensors and ultrasonic transducers for improved accuracy Suitable for pure liquids and liquids with some particles; no dependency on conductivity Suitable for all commonly used pipes Bi-directional flowmeasurement Seamless integration of temperature and flow so as to deliver a complete energy metering solution High-performance; abundant input/output features, such as 4-20mA, relay, alarm, task scheduler, batch controller and more Totalizers for flow, energy, daily energy and monthly energy Large data logger for recording multiple variables (optional) Communication: RS485/MODBUS. Optional GPRS, GSM, RF wireless Compatible with the uGalaxy telemetry system for centralized energy distribution management   Conclusions : The entire installation and system tuning was completed within two days time, therefore a quick andeconomical installation. This is only possible with non-intrusive clamp-on ultrasonic technology. The fact that the size of the pipe was as large as 24 , one can only imagine how expensive and labor intensive it would have been to use another type of technology, i.e., mechanical flowmeter or magnetic flowmeter. STUF 300R BTU meter resulted with saving the customer major installation costs and quickly delivered most favorable results. In summary, the benefits of the Shenitech Metering STUF 300R energy metering system include: Non-intrusive installation thereby significantly saving money and time, in particular for large size pipes No moving parts, thus, almost no maintenance, thereby savingmaintenance costs Accurate flow and BTU measurement improves chiller plant control Real-time data and balancing information to improve system efficiency Continuous monitoring of flow, temperature, and energy transportation guarantees system performance along with providing alarm for potential risk or energy leakage   Equipment : Shenitech Metering Clamp-on Wall-mount Ultrasonic Thermal Energy Meter, STUF 300R-C. Inline Ultrasonic BTU Meter https://www.ninthwave.co.in/inline-ultrasonic-btu-meter.htm https://www.ninthwave.co.in/inline-ultrasonic-btu-meter.htm Wed, 12 May 2021 00:00:00 +0530 BTU meters are used on chiller lines to measure the energy consumed by the chillers in the cooling process. Our BTU meters are constantly used in projects and recommended by various consultants and BMS providers across the country. Shenitech ST-280T BTU meters are based on Ultrasonic Transit Time Technology. These BTU meters assure Class-2 accuracy and have a tamper-proof model as per the energy norms in various countries.   These BTU meters have an in-built battery i.e. no hassles of power supply on the site. Battery back-up lasts for 6 years. Since there is no moving part in the sensor assembly these meters are maintenance free and hence has high reliability.   Unmatched Advatages of Shenitech BTU meters We have an entire range of ultrasonic flowmeter from 15mm to Line sizes more than 700mm and customized for higher line sizes as per your requirements. Our meters can detect a very high capacity of flow. Because of the high flow capacity, we need a lower size meter for a certain flow rate. - For example: 100mm line size might require our 65mm flow meter. This enables cost saving and also proper sizing of the meter. All our meters are wet calibrated where the temperature and flow sensor are calibrated together and we give a calibration certificate with each and every meter. All our meters have an inbuilt battery backup – guaranteed for a minimum of 6 years.Hence no hassels of giving rthe power supply and spending unnecessary cabling and cable laying cost. No reflector used for detection of flow. This ensure that meters are very robust and don’t have any problems even after years of operation. This ensures efficiency of meter and maintenance free years of operation. Single point source for meters, hardware for interconnectivity (M-Bus) and software for billing and meter reading. This ensures zero dependence on a third party. Also we ensure that the system is up and running at all times. Tamper proof design---ensures no tampering in the final bill 2 years international warranty on all the products FCU Valve https://www.ninthwave.co.in/fcu-valve.htm https://www.ninthwave.co.in/fcu-valve.htm Wed, 12 May 2021 00:00:00 +0530 High pressure zone valves used to control the flow of hot or chilled water in unitary equipment Used in conjunction with VU Fan Coil Actuators Maximum static water pressure: 300 psig Ambient temp range 34 - 104°F Patented ball seal provides long service life, soft close-off No cartridges 3-Way are mixing only Quick opening/soft closing for optimal 2-position control Compact construction for easy installation Fits under the cover of most baseboards Convectors with actuator fitted to body Actuator Ball Valve https://www.ninthwave.co.in/actuator-ball-valve.htm https://www.ninthwave.co.in/actuator-ball-valve.htm Wed, 12 May 2021 00:00:00 +0530 Details : VBN/VBF Control ball valves control hot and chilled water in HVAC systems to provide two-position, floating, or modulating functions. Order them with or without factory-mounted non-spring return or spring return direct-coupled actuators. Flanged control ball valve offering available (VBF) Accurate flow control Simplified actuator selection with a large range of Cvs Built for safety and endurance with a blowout-proof stem to withstand high pressure and optional NEMA 3R enclosure for weatherproofing Field replaceable stem allows valve to be serviced and replaced on the pipe Threaded 2-Way models up to 3" and 3-Way models up to 2-1/2" Parabolic flow insert constructed into the ball provides high quality seals and precise control Multi-actuator mounting bracket allows the same bracket to be utilized on all valves Removable manual operating handle to control valve during installation or in an event of power failure   With line sizes ranging from ½” to 2” sizes (Cv ranging from 0.4 to 250), Siemens 599 Series Ball Valves can control hot or chilled water and up to 50% glycol solution in convectors, fan coil units, unit conditioners, radiation, and reheat coils. Motorised Butterfly Valve https://www.ninthwave.co.in/motorised-butterfly-valve.htm https://www.ninthwave.co.in/motorised-butterfly-valve.htm Wed, 12 May 2021 00:00:00 +0530 Large capacity. Small Dimensions. Offer two-position or modulating control of chilled and hot water, cooling tower systems, and thermal storage systems Pipe sizes from 2 - 20" for both 2-Way and 3-Way applications Floating, modulating, 2-position direct coupled actuators and industrial-grade electric actuators; high and low pressure spring and non-spring return pneumatic actuators Lug body Manual shut-off valves for end-of-line service Corrosion resistant coating Heavy duty, corrosion-resistant top bushing, located in the upper journal, absorbs actuator side thrust Each valve is factory tested to 110% of specified pressure rating Globe Valve https://www.ninthwave.co.in/globe-valve.htm https://www.ninthwave.co.in/globe-valve.htm Wed, 12 May 2021 00:00:00 +0530 Details : Available in threaded (1/2" - 3") or flanged (2-1/2" - 6") 2-Way and 3-Way Equal percentage flow Stainless steel stem and trim 2-position or precision modulating control of hot and chilled water or steam Accurate positioning with equal percentage and linear flow characteristics to ensure state-of-the-art temperature control Actuator Globe Valve https://www.ninthwave.co.in/actuator-globe-valve.htm https://www.ninthwave.co.in/actuator-globe-valve.htm Wed, 12 May 2021 00:00:00 +0530 Details : Available in threaded (1/2" - 3") or flanged (2-1/2" - 6") 2-Way and 3-Way Equal percentage flow Stainless steel stem and trim 2-position or precision modulating control of hot and chilled water or steam Accurate positioning with equal percentage and linear flow characteristics to ensure state-of-the-art temperature control Pressure Independent Control Valve https://www.ninthwave.co.in/pressure-independent-control-valve.htm https://www.ninthwave.co.in/pressure-independent-control-valve.htm Wed, 12 May 2021 00:00:00 +0530 Details : Pressure independent control valves balance the system at every point over the range of the control valve within 5% accuracy Control flow exactly at all load conditions, not just at design conditions Improved control and performance helps extend actuator life expectancy High Turn-Down Ratio/Equal Percentage Flow results in linear heat transfer for optimal control. The characterized insert is integral to the ball, resulting in longer service life and higher differential pressure capabilities. Less torque is needed, so you can use lower-cost, low-torque actuators on larger pipe sizes No Cv calculation required - just pick the valve that matches the flow requirements - Flow range of 1 to 95 gpm Field serviceable stem allows valve to be serviced in the field rather than cut from the pipe Optional test ports facilitate system set-up for balancing report Manual override to control valve during installation or in the event of power failure Full range of sizes from 1/2" to 6" 5-year actuator warranty Manual Butterfly Valve https://www.ninthwave.co.in/manual-butterfly-valve.htm https://www.ninthwave.co.in/manual-butterfly-valve.htm Wed, 12 May 2021 00:00:00 +0530 The Manual Butterfly Valves is designed for Chilled & Hot Water to be operated by Hand lever or Gear Box   Features : Wide Size range (DN40…DN900) Operated by Lever or Gear Box. 90 deg opening/closing operation. Cast iron Body with powder coating. Epoxy Coated Ductile Iron disc. Wafer type Connection Manual Ball Valve https://www.ninthwave.co.in/manual-ball-valve.htm https://www.ninthwave.co.in/manual-ball-valve.htm Wed, 12 May 2021 00:00:00 +0530 Features : Forged Brass Body Chrome Plated Ball Standard Port and Full Port Design Manual Balancing Valve https://www.ninthwave.co.in/manual-balancing-valve.htm https://www.ninthwave.co.in/manual-balancing-valve.htm Wed, 12 May 2021 00:00:00 +0530 The Balancing Valves is designed for double regulating, control and shut off valve with built-in pressure drop measuring facility.   We have a wide range from 15mm to 300mm. It is divided in two parts, 15mm to 40mm and 50mm to 300mm as below, For 15mm to 40mm,   Application : The hydronic balance is a significant requirement for the efficient operation of a hydronic heating or cooling installation. In an unbalanced system under or over provision of hot water to individual radiators or circuits can occur. Apart from the correct selection of radiator valves, regulation of individual circuits is also necessary and in some cases, such as in DIN 18 380, VOB part C, required by national standards. The Valve is a variable orifice double-regulating balancing valve for the return with additional functions shutoff, draining and filling. It can be upgraded to an automatic balancing valve - even after the system has been taken into commission and under system pressure.   Features : Quick and easy measuring with SafeConTM measuring connections Dimensions DN15 to DN40 can be retrofitted with a Kombi-Diaphragm Unit High accuracy of pre-setting because of individual adjustment Robust valve body made of corrosion resistant red bronze Available in sizes up to DN80 Visible pre-setting dial with concealed pre-setting wheel Maintenance free spindle with double O-ring sealing’s PTFE-seat sealing  Non Returnable Valve https://www.ninthwave.co.in/non-returnable-valve.htm https://www.ninthwave.co.in/non-returnable-valve.htm Wed, 12 May 2021 00:00:00 +0530 The Dual Plate Check Valves is designed for Chilled & Hot Water for purpose non-return valve that is stronger, lighter in weight and smaller in size as compared to other Check valve.   Features: Wide Size range (DN50…DN300) Cast iron Body Lapped Ductile Iron disc Wafer type and flange type Connection Pressure Reducing Valve https://www.ninthwave.co.in/pressure-reducing-valve.htm https://www.ninthwave.co.in/pressure-reducing-valve.htm Wed, 12 May 2021 00:00:00 +0530 The PRV valve protects domestic, commercial and industrial applications against excessive water supply pressure. It reduces both water consumption and noise from water hammer, while minimising over pressure damage. The set outlet pressure can be maintained even when there are wide inlet pressure fluctuations. A drop tight seal means outlet water pressure will not increase when there is no flow. It has been awarded the Waterwise Marque.   Features : Outlet pressure set by turning the adjustment knob Set pressure directly indicated on the set point scale Adjustment spring not in contact with wholesome water Valve insert is of high quality synthetic material and can be fully exchanged Integral fine filter (160 microns) Available without fittings Light weight Reliable and proven Drop tight max. 16 bar with clear filter bowl or max. 25 bar with brass filter bowl inlet pressure 1.5 - 6 bar outlet pressure Available with pressure gauge   Options: 1/2" and 3/4" Female BSP connections 15mm and 22mm connections Auto Air Vent https://www.ninthwave.co.in/auto-air-vent.htm https://www.ninthwave.co.in/auto-air-vent.htm Wed, 12 May 2021 00:00:00 +0530 Application: The Air Vent is a reliable automatic venting device and is suitable for venting of air or gas from heating systems or heat process installations.   Features : With the shutoff valve fitted, cleaning or re-placement of the seal and inner components can be carried out without draining the system.   Range of Application : Hot water heating systems, radiators, wall and ceiling-mounted air heaters, air collection vessels, pipework circuits, boilers and air separators Not suitable for mineral oil or liquids with mineral-oil-based additives.   Design : The automatic air vent comprises: Housing Lid Float Valve seat seals   Design: Brass housing Brass lid High grade, heat-resistant synthetic material float Heat-resistant elastomer seal components Thermostat https://www.ninthwave.co.in/thermostat.htm https://www.ninthwave.co.in/thermostat.htm Wed, 05 May 2021 00:00:00 +0530 Industrial Fans https://www.ninthwave.co.in/industrial-fans.htm https://www.ninthwave.co.in/industrial-fans.htm Wed, 05 May 2021 00:00:00 +0530 Electronic Sensors https://www.ninthwave.co.in/electronic-sensors.htm https://www.ninthwave.co.in/electronic-sensors.htm Wed, 05 May 2021 00:00:00 +0530 Electronic Thermostat https://www.ninthwave.co.in/electronic-thermostat.htm https://www.ninthwave.co.in/electronic-thermostat.htm Wed, 12 May 2021 00:00:00 +0530 Programmable Thermostat https://www.ninthwave.co.in/programmable-thermostat.htm https://www.ninthwave.co.in/programmable-thermostat.htm Wed, 12 May 2021 00:00:00 +0530 Temperature Sensor https://www.ninthwave.co.in/temperature-sensor.htm https://www.ninthwave.co.in/temperature-sensor.htm Wed, 12 May 2021 00:00:00 +0530 CO2 Sensor https://www.ninthwave.co.in/co2-sensor.htm https://www.ninthwave.co.in/co2-sensor.htm Wed, 12 May 2021 00:00:00 +0530 Circular Inline Fan https://www.ninthwave.co.in/circular-inline-fan.htm https://www.ninthwave.co.in/circular-inline-fan.htm Wed, 12 May 2021 00:00:00 +0530 Propeller Fan https://www.ninthwave.co.in/propeller-fan.htm https://www.ninthwave.co.in/propeller-fan.htm Wed, 12 May 2021 00:00:00 +0530